GE 通用电气 MX150 电厂嵌入式控制器

GE通用电气的电源模块、控制器、通讯模块和输入输出模块各具特色，以下是它们各自的详细特点：

1. 电源模块：
• 电源输出：通常提供一个或多个电源输出通道，用于为其他设备和模块提供所需电源。
• 电压和电流稳定性：确保提供的电源稳定且符合规格。
• 多种电源输出：支持不同电源输出，包括直流(DC)和交流(AC)电源。
• 电源保护：包括过电流保护、短路保护和过压保护，确保设备安全运行。
• 热插拔：支持热插拔功能，允许在运行时更换电源模块，无需停机。
• 电源监测：具有电源监测功能，可监测电源输出的状态和性能。
• 电源冗余：支持电源冗余，即备用电源通道，以在主电源故障时自动切换到备用电源。
• 产品名称：GE D20 EME电源模块
• 应用领域：通常用于工业自动化和控制系统中，为设备、控制器和其他模块提供电源。
• 产品功能：
2. 控制器：
• 64MB内存和64MB非易失性用户内存。
• 处理器速度为1 GHz。
• 两个独立的10/100/1000 Gbps以太网端口和一个USB主端口。
• 支持与PROFINET控制器、以太网(EGD)和Genius IO的热备配置。
• 嵌入式以太网通信端口可实现控制器和介质冗余。
• 支持梯形图(LD)、结构化文本(ST)、功能块图(FBD)或C语言等编程语言。
• 产品名称：GE Fanuc / Emerson Automation IC695CPE330
• 应用平台：PACSystem RX3i自动化平台
• 主要特性：
3. 通讯模块：
• Profibus DP主站模块，用于与多达125个DP从站通信。
• 支持每个从设备244字节输入和244字节输出的数据传输大小。
• 最大3.584字节的输入数据和3.584字节的输出数据。
• 带有RS485 Profibus主站端口。
• 支持所有标准数据速率，包括从9.6 kBit/s到12 MBit/s。
• 提供状态信息，如从状态位阵列表、网络诊断计数器等。
• 支持同步和冻结模式以及Profibus DP-V1读取、写入和报警消息。
• 产品名称：GE 通用电气 IC695PBM300 PACSystems RX3i通信模块
• 功能特点：
4. 输入输出模块：
• 同时包含输入和输出功能，用于接收外部信号和向外部设备发送信号或控制命令。
• 支持数字输入输出(DI/DO)或模拟输入输出(AI/AO)功能，或两者兼备。
• 具有通信接口，支持常见的工业通信协议，如PROFINET、Modbus等。
• 模块化设计，便于集成到现有的控制系统中，并支持系统的扩展和升级。
• 工业级耐用性，耐高温、抗震动和防尘防水。
• 具有安全功能，如过载保护、短路保护等。
• 产品示例：GE GESVDU-1D-8946
• 功能特点：

GE Power modules, controllers, communication modules and input and output modules have their own characteristics. The following are their detailed characteristics:

Power module:

Product name: GE D20 EME Power module

Applications: Commonly used in industrial automation and control systems to provide power to equipment, controllers and other modules.

Product features:

Power output: Usually one or more power output channels are provided to provide the required power for other devices and modules.

Voltage and current stability: Ensure that the supplied power supply is stable and meets specifications.

Multiple power outputs: Support different power outputs, including direct current (DC) and AC (AC) power supplies.

Power protection: includes over current protection, short circuit protection and over voltage protection to ensure the safe operation of the device.

Hot swap: Supports the hot swap function, allowing the power module to be replaced during running without stopping.

Power monitoring: With power monitoring function, can monitor the status and performance of power output.

Power redundancy: Support power redundancy, the backup power channel, to automatically switch to the backup power supply in the event of a primary power failure.

Controller:

Product name: GE Fanuc/Emerson Automation IC695CPE330

Application platform: PACSystem RX3i automation platform

Main features:

64MB memory and 64MB non-volatile user memory.

The processor speed is 1 GHz.

Two separate 10/100/1000 Gbps Ethernet ports and one USB master port.

Supports hot spare configuration with PROFINET controllers, Ethernet (EGD), and Genius IO.

An embedded Ethernet communication port enables controller and media redundancy.

Programming languages such as ladder Diagram (LD), Structured Text (ST), Functional Block diagram (FBD) or C language are supported.

Communication module:

Product name: GE IC695PBM300 PACSystems RX3i communication module

Functional features:

Profibus DP master module for communication with up to 125 DP slave stations.

Supports data transfer sizes of 244 bytes input and 244 bytes output per device.

Maximum 3.584 bytes of input data and 3.584 bytes of output data.

RS485 Profibus master port.

All standard data rates are supported, from 9.6 kBit/s to 12 MBit/s.

Provides status information, such as from status bit array tables, network diagnostic counters, etc.

Sync and freeze modes as well as Profibus DP-V1 read, write and alarm messages are supported.

Input/output module:

Example: GE GESVDU-1D-8946

Functional features:

Both input and output functions are included for receiving external signals and sending signals or control commands to external devices.

Supports digital input/output (DI/DO) or analog input/output (AI/AO) functions, or both.

It has a communication interface and supports common industrial communication protocols, such as PROFINET, Modbus, etc.

Modular design for easy integration into existing control systems and support system expansion and upgrading.

Industrial-grade durability, high temperature, shock, dust and water resistance.

With safety functions, such as overload protection, short circuit protection, etc.